Angelo Décor International Inc.

This cord seal secures the pump cord in place. It can easily be removed if required.

If you find a small leak, use silicone for a perfect seal.

Loosen all screws.

Remove from hole.

Remove plate for access.

To re install, place all 4 screws in loosely. Secure into hole, then tighten all 4 screws. Use silicone if perfect seal is desired.

Download this file:

• How to use a Cord Seal

This entry was posted on Monday, June 11th, 2007 at 4:09 pm and is filed under Maintenance, Structural Repairs, Technical Support. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.